The product is designed to use two pairs of loudspeakers connected to one amplifier. The pairs of loudspeakers can be used simultaneously or separately. The product features a metal housing and two separate rocker switches. This design eliminates interference and volume reduction.


2-way speaker switch with terminal clamps


  • ● Failure to observe the following instructions can lead to damage to the product, the loudspeakers and the amplifier.
  • ● Turn off the amplifier before connecting the cables. Check all cable connections before turning on the amplifier.
  • ● Insert the strands correctly into the connections. Failure to do so poses a risk of short-circuiting.
  • ● Use suitable loudspeaker cables only. Contact a professional in case of doubt.
  • ● Connect passive loudspeakers to the loudspeaker outputs only (no active loudspeakers).
  • ● Connect the amplifier input to the loudspeaker outputs of a suitable audio amplifier only.
  • ● Refer to the user manual of the amplifier and the loudspeakers concerning their respective technical data and any special information concerning their connections.

  • Specifications:

  • Load 150 W RMS per channel
    Impedance 4 – 16 Ω
    Cable length max. 50 m
    Wire cross section max. 2.5 mm2
    Operating conditions -25 to +85 ºC, 20 – 75 % RH
    Storage conditions -25 to +85 ºC, 20 – 75 % RH
Gmax - Welcome